Mechanical

Dimensions

180 x 110 x 29.8 mm (7.09 x 4.33 x 1.17")

Weight

0.46 kg (1.01 lbs)

Enclosure Material

Top cover: polycarbonate Bottom cover: milled aluminum

Material Finish

Matte

Color

White

Mount Material

Injection Molded Plastic

Ports

Network Interface

Ethernet, Bluetooth

Management Interface

(4) Autosensing 2500/1000/100/10 Mbps RJ45 Ports,
(2) 10 Gbps/1.25 Gbps SFP+ Ports

Data Rate

37.5 Million Packets per second

LEDS

PoE

Amber

RJ45

Amber (Left LED): 10/100 Mbps
Blue (Left LED): 1 Gbps
White (Right LED): 2.5 Gbps

SFP+

Blue: < 10 Gbps
White: 10 Gbps

Status

RGB/Multi-Color

Hardware

Processor

Quad-core Qualcomm 2.2 GHz

Button

Reset/Factory Reset

MAC Table Size

4k Stand Alone* (With additional switches more clients can be supported depending on the switch model)

Power

Power Supply

Universal AC, 100 - 240VAC 50-60Hz External

Maximum Input Power Consumption

70W

Idle Power Consumption

5W with no connections, 9W with all ports connected

POE Budget

40W

Per-Port PoE

(2) 802.3at POE+, PoE+ (54VDC, 0.6A Max)

PoE Ports

Bluetooth Version

BLE

Total Bluetooth Power

5 dBm EIRP

Bluetooth Gain

3 dBi

Environmental

Mounting

Locking Wallmount, Desktop

Operating Temperature

-5 to 50° C (23 to 122° F)
With (1) 2W SFP+ Module: 45° C (113° F)
With (2) 2W SFP+ Modules: 40° C (104° F)

Operating Humidity

5 to 95% Noncondensing

Certifications

CE, FCC, IC

RJ45 Port Surge Protection

12kV for ESD - Contact, 25kV for ESD - Air

Software

VLAN

802.1Q

Easily Scale from Home to SMB to Stadium

Yes

Seamless Per-Client Settings

Yes

VPN Server

Yes, Multiple, Hardware-Accelerated

Actual Total Throughput

25 Gbps Combined Upload/Download

RADIUS Authentication

Yes

Deep-Packet Inspection

Yes

Intrusion Detection and Prevention Systems

Yes, at 10Gbps

WAN Failover and Load-Balancing

Yes

Hardware Features

Four 2.5 Gbps RJ45 Ports, 2 with PoE+

Two 10 Gbps SFP+ Ports

Quad-Core Qualcomm Network Accelerator

Sleek, Compact Form Factor

Single Power Supply

Release Features

Static IP, DHCP and PPPoE WAN Support

VLAN and QoS Tagging on WAN Support

Multi-WAN

Traffic Shaping for Ultra-Low Latency, using CAKE

IPsec Site to Site and Mobile Client

Multiple VLAN and Subnet Support

Alta Networks Mobile App Support

DNS Repeater

Firewall Configuration

WireGuard

IDS/IPS

NAT Configuration (Source and Destination, Port Forwarding)

Static Routes

UPnP Support

mDNS Forwarding

Dynamic DNS Client

Real-time Statistics Reporting

RADIUS Server (for IPsec VPN)

L2TP+IPSec Servers

LLDP

IPv6 Support

IGMP Snooping

IKEv2 Remote Access

DPI

Post Launch Features

Optional Rack Mount Accessory

OpenVPN

NAT Schedule

Hardware Overview

The Alta Labs logo LED on top of the device flashes as the unit is powered up. Once
fully booted, the LED will remain lit unless turned off in the UI. The LED color can also be changed in the management interface.

The bottom of the device has padding fordesktop placement and notches for mounting.

Reset Button Press down for 10 seconds until the LED begins flashing to reset the router to factory defaults.

Ports 1-4 are standard Gigabit Ethernet ports that support 10/100/1000/2500 Mbps connections.
The Link LED on the left indicates a 10/100 Mbps connection when amber and blue indicates a 1 Gbps connection. For 2.5 Gbps connections, the LED on the right will illuminate white. If neither port LED is illuminated, then the connection is down.
Ports 2 and 3 support 802.3at PoE+ with up to 30W per port and a PoE budget of 40 Watts.
The PoE LEDs are located below ports 2 & 3 with the icon next to them. They will illuminate amber when a device connected to the port is being powered via Ethernet.

The SFP+ Ports support fiber optic and Ethernet transceivers with 1 Gbps, 2.5 Gbps, 5 Gbps, or 10 Gbps connections.
The Link LED on the left will illuminate blue when there is a 1 Gbps, 2.5 Gbps, or 5 Gbps connection, it will illuminate white with a 10 Gbps connection.
The Activity LED on the right flashes blue when there is activity on a 1 Gbps, 2.5 Gbps, or 5 Gbps connection. It will flash white if there is 10 Gbps network activity.